Gas Log Installation in Fair Oaks, GA

GA LICENSE CR108397

Professional Gas Log Installation In Fair Oaks, Georgia

The Mad Hatter is a premier chimney and fireplace service company in Fair Oaks, Georgia. We offer a wide variety of the most beautiful, natural-looking gas logs, courtesy of RH Peterson Real Fyre. These traditional gas logs are handcrafted and hand-painted to be realistic and equally beautiful. Purchase your gas logs from The Mad Hatter, and a trained technician will travel to your location to install your gas logs and train you on how to operate them properly. 
 

Each gas log system has specific clearance specifications and requirements for installation. You can’t just fit the largest gas logs possible inside your fireplace. Safety clearances must be met so that enough air space is available for the burner to operate safely. Our gas log service technicians can help you determine what size gas logs your fireplace can hold and answer any questions you may have. 

If you are looking for a gas log fireplace specialist in Fair Oaks, please call (770) 740-8133 or complete our online request form. Gas log installation service is an additional fee and is only available for gas logs purchased from The Mad Hatter.

Step By Step Guide To Buying Gas Logs

Gas log installation step by step purchasing guide

Step 1 – Choose Your Venting Option

If you are buying gas logs for your existing fireplace, check it to see which venting system you have in place. If you are buying gas logs for a new fireplace, consider the differences between vented and vent-free gas logs

Vented Gas Logs

  • Most realistic and natural-looking flame
  • Must be installed in a fully functioning wood-burning fireplace. 
  • Radiant heat delivers warmth into the room, similar to burning wood. 
  • Produces some soot when the flame touches the log. 

Vent-Free Gas Logs

  • Delivers more heat inside your home.
  • Must be installed in a fireplace approved for a vent-free log set.
  • Installation is subject to state and local codes. Some areas do not allow vent-free.

Step 2 – Determine The Size Of Your Logs

This simple measuring process will help you choose the size you need. 

  1. Measure the front width of your fireplace.
  2. Measure the width at the back of your fireplace. 
  3. Measure the depth from the front to the back of your fireplace. 
  4. Measure the height from the top to the bottom of the front of your fireplace. 
  5. Measure the height from the top to the bottom of the back of your fireplace. 
 

Step 3 – Choose How To Control The Gas Logs 

Match Light

This option is for natural gas only. There is no pilot, only the logs and the burner. Your fire is lighted by placing a match or lighter near the burner, then turning on the gas with your key valve. You control your flame height by using your key valve, which is normally located outside the fireplace either in the wall or floor. 

Manual Safety Pilot

This system has a safety pilot that is manually lighted and stays lit all the time. Also called a standing pilot, it is similar to a pilot found in a water heater. You can turn the burner on and off manually by reaching inside your fireplace and turning the control knob. You cannot operate this type of system with remote control, but you can upgrade later. 

Remote Control

Remote control systems include a remote pilot valve assembly. Depending on the remote option you select, you will have the ability to control certain functions of the log set from a remote control. Remote-controlled options include basic on/off control, as well as variable flame control height. 

Step 4 – Choose Natural Or Propane Gas

You may already have a gas line installed in your fireplace, in which case the gas you burn will be decided. If there isn’t a gas line, then you will need to decide what fuel type you would like to use. 

Step 5 – Shop For Gas Logs At Our Online Store

We have vented and vent-free gas logs on our online store. Click here to shop gas logs.

Shop Vented Gas Logs Below

Read Our Google Reviews!

We used Mad Hatter for a major frame replacement on our indoor fireplace in 2022. Then 2 years later we had a small unrelated issue with the pilot light going out. Derek was able to walk us through over the phone in 10 min and we got the pilot light back going again. Superior service 100%. 0-10 scale, I give them a 15 for both sales and service.
read more
Michael Kohl Avatar
Michael Kohl
12/03/2024
We contacted Mad Hatter to look at our gas fireplace that was not functioning. We had another fireplace company look at it prior to Mad Hatter and were not happy with their assessment of replacing the unit. Mad Hatter was on time, completed a comprehensive assessment and able to get the unit fuctioning again. Matt was knowledgable, through in explaining the issues and the clean-up after the unit was again functioning all at a cost that was very reasonable. We were ecstatic and so very pleased with Mad Hatter & Matt. Mad Hatter will be our company for any future fireplace needs.
read more
V Hood Avatar
V Hood
11/23/2024
Every experience with Mad Hatter is a reminder of what true professionals they are. From prompt arrival, setup to ensure protection of your home, thorough testing every aspect of functionality (even beyond the scope of their specific work) and documenting with pictures as well as providing clear explanations, Matt was fantastic. We took advantage of their Customer Appreciation sale and are thrilled with the new log set installed. What a big difference and we know the setup is safe and correct. Thank you Mad Hatter and Matt - we will only use you!
read more
Marilynn Youngs Avatar
Marilynn Youngs
11/20/2024

The Mad Hatter
Proudly Serves

Serving Zip Codes:
30008, 30060, 30080